Worldwide

You can find our completed projects at the following locations

1. Germany

2. Algeria

3. China

4. Cyprus

5. Montenegro

6. Romania

7. Russia

8. Republic of Srpska

9. Ukraine

10. Vietnam

 

GERMANY

  • Hemopharm GmbH, Bad Homburg – Business center – 1.300 m2
  • STADA Arzneimittel AG, Bad Vilbel (2008) – Development of the detailed design for business-laboratory complex
  • STADA Arzneimittel AG, Bad Vilbel (2011) – Consulting services during the design and execution of works on the reconstruction of the laboratory complex

ALGERIA

  • Hemovita – Design of the factory for production of solid effervescent dosage forms

CHINA

  • Jinan-Hemofarm – Design and construction of a factory for production of infusion solutions

CYPRUS

  • Aegis Ltd., Nicosia (2010) – Construction and promotion of the departments of Plant for solid dosage forms

MONTENEGRO

  • Hemomont Ltd, Podgorica (1994) – Designing and construction of a factory for production of infusion solutions – total area of 2,050 m2, plant area of 1,050 m2
  • Hemofarm JSC – representative office in Podgorica – area of 120 m2
  • Hemomont Ltd, Podgorica (1998) – Factory of ophthalmic solutions, Phase II – total area of 3,200 m2, manufacturing plant of 1,700 m2
  • Hemomont Ltd, Podgorica (2007) – Reconstruction of Microbiological laboratory
  • Hemomont Ltd, Podgorica (2007) – Execution of works on the reconstruction of the Plant for liquid and solid dosage forms – Phase I
  • Hemomont Ltd, Podgorica (2007) – Execution of works on the reconstruction of the Plant for liquid and solid dosage forms – Phase II
  • Hemomont Ltd, Podgorica (2008) – (Plant for sterile products (including laboratories and warehouses)) – Inspection by the National Agency for Medicines – ANM, Romania – Creating validation plans, Performance of Impact Analysis and Risk Analysis (HVAC, BMS, PW, CA) and design qualifications (DQ); IQ/OQ HVAC, clean rooms and BMS systems, writing and execution of the protocol, report writing; IQ/OQ/PQ system for production and distribution of PW, WFI, writing and execution of the protocol, report writing; IQ/OQ of the production equipment (autoclaves, pass box), writing and execution of the protocol, report writing
  • Hemomont Ltd, Podgorica (2009) – Preparation of technical documentation – Adaptation of the area for central dispensing
  • Hemomont Ltd, Podgorica (2009) – Preparation of technical documentation – Detailed design of the reconstruction of the Plant for solid dosage forms
  • Hemomont Ltd, Podgorica (2010) – Execution of works on the reconstruction of the Plant for solid forms
  • Hemomont Ltd, Podgorica (2011) – (Plant for solid forms (including laboratories and warehouses)) – Inspection by Regierungspräsidium Darmstadt, Germany – IQ/OQ HVAC, clean rooms and BMS systems, writing and execution of the protocol, report writing; IQ/OQ/PQ system for distribution of PW, writing and execution of the protocol, report writing; IQ/OQ system for distribution of compressed air, writing and execution of the protocol, report writing; IQ/OQ of the production equipment (Coating machine, Strips packaging, Tableting machine, Samples taking chamber), writing and execution of the protocol, report writing
  • Hemomont d.o.o., Podgorica (2015) – Design and execution of works on: Reconstruction of existent facilities within the complex of Hemomont d.o.o. Podgorica with a view to constructing a new department for sterile nasal spray production (SNUP) and the mobile racking warehouse
  • Hemomont d.o.o., Podgorica (2015) – Design and execution of works on: extension-adaptation of the Physico-Chemical Laboratory of the Quality Control Service of Hemomont d.o.o. Podgorica
  • Hemomont d.o.o., Podgorica (2016) – Execution of works on the dismounting of clean room panels and plaster walls and bringing them back into the original form, within the production area of SNUP, Hemomont d.o.o., Podgorica

ROMANIA

  • Hemofarm JSC – representative office in Bucharest – area of 120 m2
  • LABORMED Pharma, Bucharest – Project management, expert consulting and validation of the factory for production of solid dosage forms – area of 12,500 m2
  • LABORMED Pharma, Bucharest (2007) – (Plant for Solid Dosage Forms) – Inspection by the National Agency for Medicines – ANM, Romania – Writing validation plans, Performance of Impact Analysis and Risk Analysis (HVAC, BMS, PW, CA) and design qualifications (DQ )
  • Hemofarm STADA SRL, Timisoara (2008) – Designing business-laboratory facility
  • Hemofarm STADA SRL, Timisoara (2009) – Preparation of technical documentation for the construction of physical-chemical laboratory and the provision of expert supervision during construction
  • Hemofarm STADA SRL, Timisoara (2010) – Execution of works on automation of the electrical-motor plant of the physical-chemical laboratory
  • Hemofarm STADA SRL, Timisoara (2010) – (Physical-chemical laboratory) – Inspection by the National Agency for Medicines – ANM, Romania – IQ/OQ HVAC, clean rooms and BMS systems, writing and execution of the protocol, report writing; IQ/OQ/PQ system for distribution of PW, writing and execution of the protocol, report writing; IQ/OQ of the production equipment (washing machine), writing and execution of the protocol, report writing
  • Hemofarm STADA SRL, Timisoara (2012) – Preparation of technical documentation for the adaptation of the second floor of the building of physical-chemical laboratory
  • Hemofarm STADA SRL, Timisoara (2013) – Execution of works on the adaptation of the second floor of the physical-chemical laboratory
  • Hemofarm STADA SRL, Timisoara (2013) – Adaptation of the second floor of the physical-chemical laboratory – Qualification of the HVAC and BMS systems

RUSSIA

  • Tyumen – Designing and construction of a factory for production of infusion solutions and solid dosage forms
  • Moscow –Cardiology Center Building – Designing and construction of a factory of injection solutions
  • Hemofarm JSC – representative office in Moscow – area of 1.150 m2
  • Moscow – Dormitory “GITIS”, area of 3.600 m2
  • FKNT Moscow – Designing and general execution of works on equipping the factory for sterile pharmaceutical production of injection solutions in ampoules – area of 18,000 m2
  • Hemofarm Obninsk (2005) – Designing, general execution of works, equipment installation and validation of the factory for production of solid dosage forms – area of 12,500 m2
  • FKNT Moscow – Designing, installation and validation of technological systems for production and distribution of PW, WFI and clean steam
  • NizhFarm, Nizhny Novgorod (2007) – Preparation of technical documentation, conceptual solution, preliminary and detailed design – microbiology laboratory
  • NizhFarm, Nizhny Novgorod (2007) – Preparation of technical documentation, conceptual solution, preliminary and detailed design – gels production department
  • Hemofarm Obninsk (2007) – Development of preliminary and detailed design for the system of automation of plants for production and distribution of process fluids (PW)
  • Hemofarm Obninsk (2007) – (Plant for solid dosage forms, including laboratories and warehouses) – Inspection by Regierungspräsidium Darmstadt, Germany – Writing validation plans, Performance of Impact Analysis and Risk Analysis (HVAC, BMS, PW, CA)
  • Hemofarm Obninsk (2009) – Consulting services during the development of the technical documentation for high-rack warehouse
  • KanonfarmaProduction, Selkovo (2010) – Preparation of technical documentation for the reconstruction of pharmaceutical facility
  • NearmedicPharm LLC, Obninsk (2010) – Preparation of technical documentation for construction of the pharmaceutical complex
  • NearmedicPharm LLC, Obninsk (2011) – Execution of works on the construction of the buildings of the pharmaceutical industry
  • NearmedicPharm LLC, Obninsk (2011) – Equipment delivery
  • KanonfarmaProduction, Selkovo (2012) – Preparation of technical documentation for the construction of the factory complex for production of medications
  • “Nearmedic Pharma” LLC, Russia (2015) – Execution of works and equipment delivery on the project „NEARMEDIC PHARMA” LLC
  • The Russian pharmaceutical, biotechnological and medical limited liability company “NIARMEDIK PLUS”, Russia (2015) – Reconstruction of existing laboratory premises for the production of medicinal products “KOLLOST”
  • OOO Hemofarm Obninsk, Russia (2015) – Reconstruction of Solid Form Plant (Design – preparation of “P” and „RD” stages)
  • OOO Hemofarm Obninsk, Russia (2015) – Microbiological laboratory OKK. Administrative Section OKK and OK (Design – preparation of “P” and „RD” stages)
  • OOO Hemofarm Obninsk, Russia (2015) – STADA CIS Distribution Centre (Design – of “P” and „RD” stages)
  • OOO Hemofarm Obninsk, Russia (2015) – Laboratory corpus (Design – Conceptual design)
  • “Nearmedic Pharma” LLC, Russia (2015) – Execution of works and delivery of equipment on the project „NEARMEDIC PHARMA” LLC
  • (2016) Preparation of Design-Technical Documentation for „Organization of Russia’s first closed cycle production of the lyophilized agent for genetic identification of humans and establishment of kinship“
  • Palladio LLC, Obninsk, Russia (2016) – Preparation of technical documentation and construction of the Palladio Obninsk Factory for the Manufacture of Packaging for Pharmaceutical and Cosmetic Industries
  • Palladio LLC, Obninsk, Russia (2017) – Construction of the Palladio Obninsk Factory for the Manufacture of Packaging for Pharmaceutical and Cosmetic Industries
  • Hemofarm, Obninsk, Russia (2017) – Preparation of Design-Technical Documentation for the Laboratory Corpus, within the existent solid dosage form factory of Hemofarm Obninsk

REPUBLIC OF SRPSKA

  • Hemofarm Ltd, Banja Luka – Designing and realization of the factory for production of solid dosage forms – area of 4.500 m2
  • Hemofarm Ltd, Banja Luka (2006 – 2010) – (Plant for solid dosage forms (including laboratories and warehouses)) – Inspection by Regierungspräsidium Darmstadt, Germany – Writing validation plans, performance of analysis of the impact; IQ/OQ HVAC, clean rooms and warehouses and BMS systems, writing and execution of the protocol, report writing; IQ/OQ/PQ system for distribution of PW, writing and execution of the protocol, report writing
  • Hemofarm Ltd, Banja Luka (2007) – Development of the detailed design for adaptation of the facility of Sonik-Stend – microbiology laboratory, physical-chemical laboratory, central dispensing, warehouses
  • Hemofarm Ltd, Banja Luka (2008) – Automation of air conditioning system at the facility of Sonik-Stend
  • Hemofarm Ltd, Banja Luka (2008) – Preparation of technical documentation for the reconstruction of Plant for solid dosage forms, area of 3.250 m2
  • Hemofarm Ltd, Banja Luka (2008) – Technical supervision
  • Hemofarm Ltd, Banja Luka (2009) – Execution of works on automation
  • Hemofarm Ltd, Banja Luka (2009) – Execution of works on clean rooms
  • Hemofarm Ltd, Banja Luka (2009) – Technical supervision – Plant for Solid Dosage Forms
  • Hemofarm Ltd, Banja Luka (2009) – Preparation of technical documentation – The detailed design for restaurants within the plant for dosage solid forms
  • Hemofarm Ltd, Banja Luka (2009) – Designing the transport bridge with access road to the facility of Sonik-Stend
  • Hemofarm Ltd, Banja Luka (2010) – Execution of works and supply and installation of elements for clean rooms, electric-motor drive and automation

UKRAINE

  • Vitamin Institute of Kiev, Kiev – Consulting services in the form of professional audit of conceptual design of solid dosage forms factory in Kiev – area of 10,000 m2
  • Vitamin Institute of Kiev, Kiev – Project of reconstruction of the plant for production of various forms of medical devices – 45.000 m2
  • OOO Institute of Biochemical Technology (2011) – Development of preliminary technological design – Reconstruction of a factory for production of medications
  • Institute of Biochemical Technology, Kiev (2012) – Preparation of technical documentation for the reconstruction of the facility of the pharmaceutical industry

VIETNAM

  • STADA, Vietnam (2007) – (Plant for Solid Dosage Forms) – Inspection by Regierungspräsidium Darmstadt, Germany – Writing validation plans and impact analysis
  • PymePharco, TuyHoa (2012) – GMP Consulting
  • PYMEPHARCO, Tuy Hoa, Vietnam (2015) – The plant for manufacturing sterile beta lactamase products, reconstruction (Conceptual and Base Designs, consulting for negotiations and execution)
  • PYMEPHARCO, Tuy Hoa, Vietnam (2015) – The plant for manufacturing sterile beta lactamase products, reconstruction (Validation scheme and equipment and system qualification)